下面的內容是對于如何檢測12PSB噴油泵試驗臺的事項闡述，所展示的高壓共軌試驗臺都是現場拍攝，提供的內容都是經過泰安市泰山區精達動力機械制造廠噴油泵試驗臺廠家經驗所得，請點擊進入查看更多高壓共軌噴油器試驗臺的相關行業信息吧。

如何檢測EPS619柴油噴油泵試驗臺？

柴油高壓泵的檢測，需要單獨的測試設備，噴油泵試驗臺的問世，使得各款機械式高壓噴油泵的測試走向系統化、標準化。廠家說，要保證試驗臺工作運行穩定，不抖動，減少檢測誤差，設備的運行平穩尤為關鍵。

我們精達動力生產EPS619柴油噴油泵試驗臺已有多年的經驗和思路，下面是我們認為該試驗臺運轉穩定的必要工作前提，這樣才能提升價格。

1：試驗臺的中心距嚴格執行125mm的標準，上下跳動不高于0.001mm。

2：試驗臺刻度盤再任何位置不超過正負10mm誤差。

3：設備的計數測量范圍在100-1000次每分鐘內，轉速采集誤差不高于1r/min。而且試驗臺安裝的誤差不可過大。

以上是我們精達動力對我們生產的試驗臺性能穩定的測量和執行標準，我們生產的液壓泵試驗臺、高壓共軌試驗臺、電噴油嘴試驗臺機銷售的噴油器專用工具都會按照用戶滿意，操作方便、價格合理的方針執行，歡迎新老用戶朋友隨時關注我們！

How to test eps619 diesel fuel injection pump test bench?

The detection of diesel high-pressure pump requires separate testing equipment. The advent of fuel injection pump test bench makes the testing of various mechanical high-pressure fuel injection pumps systematic and standardized. The manufacturer said that to ensure the stable operation of the test-bed without jitter and reduce the detection error, the stable operation of the equipment is particularly critical.

We have many years of experience and ideas in the production of eps619 diesel fuel injection pump test bench by Jingda power. The following are the necessary working prerequisites for the stable operation of the test bench, so as to increase the price.

1: The center distance of the test bench shall strictly comply with the standard of 125mm, and the up and down runout shall not be higher than 0.001mm.

2: The error of the dial of the test bench at any position shall not exceed plus or minus 10mm.

3: The counting measurement range of the equipment is 100-1000 times per minute, and the speed acquisition error is not higher than 1R / min. Moreover, the installation error of the test bench should not be too large.

The above are the measurement and implementation standards of our Jingda power for the stable performance of our test-bed. The special tools for fuel injectors sold by our hydraulic pump test-bed, high-pressure common rail test-bed and electric fuel injector test-bed will be implemented according to the policy of user satisfaction, convenient operation and reasonable price. Welcome friends from new and old users to pay attention to us at any time!

內容由百度翻譯，僅供參考。